Vacation Break for Electrical Machines

Are you overloaded? Have you become a part of the highly stressed modern working environment? You may need a break - a vacation, a change in environment, a change of pace...

Similarly, machines can be overloaded too. Those that were designed for a particular system are often pushed to their limits when new requirements emerge.

Just like the final straw that breaks the camel's back, electrical machines too, can reach their breaking point. If there is no vacation for them, they will burn.

Fuses and circuit breakers are designed to stop the current in a circuit before any damage can occur - create a vacation or a break for them.

A circuit breaker is one of the ways to prevent motors (or other electrical machines) from burning due to overloading. All electrical motors produce heat when running. At the time of a fault, this heat builds up at a much higher rate than it can be dissipated. This can result in damaged equipment, fire or even explosion.

The electrical protective device like the circuit breaker is designed to de-energize the circuit before this heat level becomes dangerous.

There are basically 2 means of activating a break - thermally (heat) or magnetically.

Thermal circuit breakers make use of bimetallic strips that will bend due to the different expansion rates of each of the metals in the strip. The bending of the strip will move a tripping mechanism latch that will then open up the contacts of the circuit breaker.

Because bimetallic strips take time to heat up and bend, this type of tripping device is used for tripping prolonged overloaded situations. The setting for breaking the circuit at a particular overload value can be adjusted.

Magnetic circuit breakers make use of the field strength of magnetic coils to trip a latch that will then open up the contacts of the circuit breaker. This method is used for high current faults, like in a short circuit. This method is designed to trip instantly.

A thermal-magnetic circuit breaker incorporates both a thermal strip and a magnetic coil. This type of circuit breaker is able to protect against momentary overloads as well as high or short circuit current faults.

What happens if the circuit breaker is placed in a high temperature environment? The thermal bimetallic strip bends on high temperature. In this case, the current is not causing the high temperature in the bimetallic strip, but the ambient air is! The current may still be below the safe operating rated value for the motor.

In this case, a compensating bimetallic strip may be incorporated into the circuit breaker to eliminate this type of error. These circuit breakers are often used in hot areas like furnace, oven, and boiler rooms.

Circuit breakers can be reset very quickly, once they have tripped. Can your break or vacation be reset very quickly too? Don't reset. Take a long break!

Until next time...

Are You Stumped by Complicated Electrical Calculations? Learn Electro-Technology Calculations for 1st Class Marine Engineers Competency License Exams at Electro-Technology Questions & Answers e-book. Applicable for all electrical installations both on ships and at shore.

Many years of working experience in Marine, Facilities, Construction has given the author material for writing e-books and articles related to engineering, and management. Subscribe to facworld ezine. More information at Marine Engineer and M & E Engineer

---

Old House Remodeling: Removing Old Tile and Glue

When you live in old house like I do, remodeling... Read More

Planning Permision Tips UK - 6 Common Design Mistakes When Extending a Residential Property

Don't you just love the design of some of these... Read More

Seeing the Light

Lighting"Light has illuminated the path of humanity" ? While Einstein... Read More

Choosing a Vinyl Replacement Window Contractor

Whenever I write an article, it's usually tailored to the... Read More

Basement Waterproofing Advice

Basements need to be waterproofed for many reasons. Cracks in... Read More

Why Should You Need Tools for Everyday Living

How often you have used tools for your everyday living?... Read More

Why Cant We Kill Too?

Why does big business have all the fun? We fix... Read More

Choosing a Home Construction or Remodeling Contractor

Choosing the right Contractor is the most important aspect of... Read More

Trading in Corporate Office for Home Office

Six years ago, I had not yet turned on a... Read More

Advice on Waterproofing Your Deck

Even if you undertook the task of building your own... Read More

A Checklist for Bathroom Remodeling Plans

Careful planning is the key to a successful bathroom-remodeling project.... Read More

How To Completely Rehab Your Home In 10 Days!

This report is about taking a house and restoring it... Read More

Conventional Steam Saunas vs. Infrared Saunas

The health benefits of steam saunas have been recognized for... Read More

10 Spring Cleaning Tips For Your Kitchen

The words "spring cleaning" can make the neatest person cringe.... Read More

Bring Out the Comforters for Back to School

If the weather is turning chilly it must time for... Read More

The Different Roofing Materials Used for Flatroofs, Their Advantages and Disadvantages

The roof has had many different innovations in regards to... Read More

I Need What Part?

One of the first things you learn as a homeowner... Read More

Materials For Building Window Shutters

Shopping for window shutters can become confusing because of the... Read More

Rising Damp

It doesn't sound like a particularly interesting topic, however a... Read More

Reduce Your Heating Bills This Winter

Imagine leaving a window open all winter long -- the... Read More

How to Build a Home Sauna - Three Important Questions to Answer Before Building

Considering that home saunas are believed to produce numerous health... Read More

Bathroom Magic

Believe it or not, the bathroom is one of the... Read More

Designing Your Log Home: Tips To Keep You Out of Trouble

Nearly every log home is a custom design, whether you... Read More

Expansion for Heat Absorption

In the refrigeration cycle, the refrigerant must undergo a change... Read More

Home Inspection: A Doctor Visit for Your Home

Has your house had a check up yet?Home inspection is... Read More