This months tip deals with micing kick drums.
You wouldn't believe how many people ask me about micing their kick drums. It leads me to believe people really don't know how to.
-ON SOAPBOX-
It became so fashionable in the mid-90's through the early 2000's to use MIDI or sampled dum sounds in productions that many people now have no idea how to record a "real" drum when the "band" or "live" sound came back in.
-OFF SOAPBOX-
So, first things first. You need to make sure the actual sound source, in this case the drum, sounds as good as it can sound. You might have to "sell" the idea to the drummer that just because his drum set sounds or works a certain way in a live setting, that might, (probably) won't sound good in the studio.
One of the initial assessments you must make is determining the value of the drum. This isn't a precise science and if you are not a drummer, this probably won't be common knowledge. But it is pretty easy to learn. The next time you are in your local music store drooling over the latest TC Electronics piece, work your way over to the drum department. Pay close attention to the difference in the shells between the inexpensive sets (say $1000 or less) and the more expensive sets (those over $1000). If the shell is pure wood, like maple or birch, it typically needs less muffling in the recording process. If the shell is some type of wood or fiberglass wrap, as commonly found on less expensive kits, they normally require more muffling for recording purposes.
Less muffling usually means keeping the front (non-beater) head on. This way, the drum can vibrate fully and resonate completely. The ringing may sound like too much, but most of the ring will be lost in the mix. Again, this is a different mindset than live. In a live situation, you would want to control the ring as much as possible to avoid feedback. If you start recording and the drum is still ringing too much for your taste, start muffling a little bit at a time. A thin blanket laid inside the drum will usually do the trick.
With less expensive drums that need more muffling, take the front head completely off or at least make sure that there is a good size mic hole cut into the head. Muffle with pillows and/or blankets. There are beater, or back, heads that come pre-muffled. If possible, use a head that is not muffled. These muffled heads work great in a live setting but do not give you as much control in the studio. Add or take away muffling as needed. Keep this in mind, though, although much of the ringing will still be lost in the mix, the tone that an inexpensive shell puts out is not nearly as "sweet" as a better shell. It is usually in your best interest as an engineer to cut as much of this ring without losing all of the tone.
The second aspect of micing a kick drum is the mic itself. Usually, a dynamic mic with the largest diaphragm you can find is the best bet. My all-time favorite mic for kick drums is the EV RE20. This mic is fairly expensive for a dynamic mic, though, and many home studios do not have them in their mic aresenal. The AKG D112 is a good choice. Sennheiser has its E series that is pretty good. If all else fails, you can always use a Shure SM57. You need a couple of these in your studio anyway.
The last part of micing your kick drum is the mic placement. A few inches one way or another can make or break your recording, so experiment, experiment, experiment! As a general rule, the more muffled your drum is the deeper inside the drum you want to place your mic. Start with the mic flush with the front head with the mic facing the beater and keep moving the mic further and further into the drum until you get the perfect balance between tone and the "slap" or "click" of the beater.
Here are some tricks that I have personally used with good results:
- to get more "click" or beater sound
Switch beater from cloth to wood. These can be bought at your local music store.
On top of pillows or blankets, sit a cinder block. It gave me a "punchier" sound.
Use a seperate mic in back of the kick drum by the drummer's foot facing the beater. - not enough low end
Set a chair a few feet in front of kick drum and drape a heavy blanket from the drum to the chair. (You may need to use a bit of duct tape to get the blanket to stay on the drum.) Set the mic under the chair facing the kick drum. This tends to focus the low end and let it develop a bit more before it reaches the mic.
Whew! That's alot of work, huh? Again, don't be afraid to experiment.
Philip Langlais is the founder of iKnowAudio.com, the site for affordable, practical online audio production training. We specialize in teaching you the art of digital recording, mixing, editing, mastering, how to use compressors, eq's, reverbs, etc. Visit us at http://www.iknowaudio.com.



Congratulations, you just bought you first guitar! Now that you've... Read More
Playing the ModesWhen I used to use this pack with... Read More
Cultures around the world since the beginning of time have... Read More
In an interview given to Musik Magazine in 2000, Eminem... Read More
We all have so many critical voices in our heads.Telling... Read More
Ostinato means "repeating pattern" and is used frequently in all... Read More
Almost everyone has heard about the massive crack down on... Read More
The new competition package available for the BMW M3 is... Read More
Legend Vega is scheduled to release her newest CD this... Read More
Before they got together as Green Day, Billie Joe Armstrong,... Read More
Music downloads are highly compressed audio files transferred onto a... Read More
I wish you could have seen me play the piano... Read More
When I first began playing the piano and improvising, there... Read More
How is it that a little white boy from Kansas... Read More
Getting ready for any type of guitar performance can be... Read More
One of the reasons I picked up the violin was... Read More
As an amateur songwriter, who struggles with a computer far... Read More
Different styles of music have different "sounds." We can all... Read More
This article gives the essential basics for how to play... Read More
Whether played by a marching band, an orchestra, or a... Read More
Now that you've spent hours and days and weeks and... Read More
Do you ramble on endlessly with your improvisations? If so,... Read More
Learning to fiddle the Orange Blossom Special is not easy,... Read More
I have always believed that success, in practically any subject... Read More
In 1994 Daniel Johns and his group Silverchair were catapulted... Read More
Fan support for musicians is a two way street. You... Read More
It sounds like a side show, doesn't it? It does... Read More
In this guitar lesson we look at a great way... Read More
Do you ramble on endlessly with your improvisations? If so,... Read More
Is your heart in the music? If so, it won't... Read More
There is a lot more to the story that meets... Read More
The Rickenbacker 4003 electric bass guitar is one of the... Read More
U2s lead singer Bono isn't content with being part of... Read More
Learning how to improvise is confusing for most. The sheer... Read More
Here's a method I use that works. First, sit down... Read More
That's a fair question!Basically, you can call music any noise... Read More
Music downloads are highly compressed audio files transferred onto a... Read More
Remember the old ad that used to run endlessly in... Read More
I met New York jazzman Tim Armacost in college almost... Read More
Performance anxiety is not something that only happens to musicians,... Read More
The Ibanez SR400 bass guitar is very comfortable to play.... Read More
It has become increasingly popular for U.S. military veterans and... Read More
It is said that the forerunner of the guitar, the... Read More
Everybody's doing it: downloading music and sharing files. People who... Read More
How many times have you turned to music to uplift... Read More
Mid 1959 Stratocaster vintage guitars have a slab rosewood fingerboard... Read More
Not since the heyday of Dance/Pop Artists like Taylor Dayne... Read More
G-Units 50 Cent , was born 6th of July 1976... Read More
Have you ever been told that you were good at... Read More
All right, folks, here you go: My 12 reasons why... Read More
Answering Service ResourceAnswering Service Resource |